CivDot is an autonomous rover that is designed to efficiently lay out survey points on your job site, saving you time while increasing productivity.

Prototype Video Demonstration:

CivDot is Ideal for:

 

 

Laying out Guardrail Post Installation points:
 

 

 

 

1:

Lay out the points using the CivDot

The CivDOT paints coordinate points on the road to indicate where each guardrail post will be installed based on your survey data from a CAD or csv file.

2:

Install Guardrail Posts

Using a Post Pounding Machine, the guardrail posts can then be installed over the survey points.

Groundwork also supply a range of Guardrail Post Drivers/Pounders. View our range:

Click here to View Guardrail Pounders

3:

Install Barrier

The Barrier install unit attaches to the Pounder and is designed to guide and position the barrier onto the posts.

GROUNDWORK supplies the barrier install unit. View the produce below

click here to view Barrier install unit

 

 

 
laying out Pile Installation points on Solar Farm job site:

 

 

1:

Lay out the points using the CivDot

The CivDOT paints coordinate points on the job site to indicate where each pile will be installed based on your survey data from a CAD or csv file. This makes it easy for surveyors to place stakes over these points.

2:

Pile Pounder to install Piles

Using a Pile Pounding machine, piles can now be installed over the coordinate points on your solar farm site.

GROUNDWORK also supply a range of Pile Drivers/Pounders. View our range:

click here to view pile drivers

Benefits of CivDot:

 

 

10x FASTER

The CivDOT can lay up to 4,000 points per day on your construction site, making it easier and faster for the surveyor to lay out stakes.

AUTONOMOUS

navigation and marking by simply using the survey data from your CAD or .csv file

1-2cm ACCURACY

1-2 cm accuracy using Dual RTK

Specifications

Total weight : 14 kg
Max speed: 2.5 m/sec
Recommended speed: 1 m/sec
Ground clearance: 8 cm
Operating temp: (-20)-60 c
Run time: 4 hr
Shaft material: Titanium
GNSS GPS/QZSS, GLONASS L1, L2; BeiDou B1, B2; Galileo E1, E5
Kinematic Horizontal 7mm + 1ppm
Kinematic vertical 14mm+1ppm
long range radio up to 8km from base station
Markings 
Horizontal accuracy 10mm+1ppm
Vertical accuracy 17mm+1ppm
Tilt compensation Automatic compensation for pitch, roll and slopes
Marking options points, continous & dashed lines
Mission planner
File type .csv
User interface tablet & pc
Output per can
Points (#) 500
line (m) 300